Hydrogen Peroxide INTEROX ST-60

INTEROX®ST-60 is a hydrogen peroxide solution used in a wide range of applications in pulp and paper, chemical, textile, environmental, metallurgy, industrial and institutional applications.

Some applications of this product may be regulated or restricted by national or international standards (eg food or feed additives, water treatment, cosmetics or pharmaceuticals, etc.).

Purchaser and end user shall, under their sole and entire responsibility, comply with these standards, the directives of any relevant authority, and all existing patents and intellectual property rights; and must comply with the laws and regulations applicable to our products and/or its activities. It is up to the purchaser and end user to determine the suitability of this product for any particular purpose and how to use it.

SPECIFICATIONS
Content Unit Meas. Value Methods of analysis
Concentration 590 – 599 g/kg (methods of analysis – 7157 am)

View – Pure liquid
pH (apparent) < 3 (methods of analysis – 7160 am)

PHYSICAL AND CHEMICAL PROPERTIES
INTEROX®ST-60 is an aqueous solution of hydrogen peroxide. It is a clear, colorless liquid with a pungent odor, miscible with water in any proportion.

Package:
INTEROX®ST-60 is available in bulk, containers (IBC) or drums.

Volume of 1 ton of product (25°C): 0.81 +/- 0.01 cubic meters
Boiling point at 101.3 kPa: 119°C
Freezing point: – 55°C
Viscosity at 20°C: 1.1 +/- 0.01 mPa.s

STORAGE AND HANDLING
Hydrogen peroxide should be stored in properly designed storage tanks made from approved materials.
Packaged hydrogen peroxide should be stored in the original vented container in an upright position in a cool, ventilated area where the container is protected from damage. Use only approved materials for pumps, piping and hoses.

Hydrogen peroxide has special handling and storage requirements. Connect with
your supplier for more details.

SECURITY
Personnel handling hydrogen peroxide must be familiar with the safety and handling procedures and should always
wear protective goggles or a face shield and rubber gloves. When working with large volumes, it is also necessary to wear a chemical suit and rubber boots.
Hydrogen peroxide is a caustic solution that can cause burns.
In case of contact with skin or eyes, always rinse with plenty of water and seek medical advice.